12/8/2023 0 Comments Infors ht multitron![]() ![]() If t he area under the shaking table has a hygienic design, it will have a smooth base and is deep enough to hold spills from large flasks i.e. If necessary, disinfect with a standard disinfectant e.g. W ipe the trays and their mounted parts regularly (rails, clips, adhesive matting, etc.) with a soft cloth and a mild household cleaner. M ake sure no residues are left behind by rinsing with clean water. ![]() Only clean the glass door inside and outside with a soft cleaning cloth and mild detergent solution (diluted with de-ionised water). There is a risk of damage to the surface s due to use of abrasive cleaners such as scouring pads and similar utensils. Use a damp cloth and mild detergent to clean the touchscreen panel of the controller and the plexiglass cover protecting the lighting unit – do not apply liquid directly to the surfaces or use aggressive chemicals. Then clean with disinfectants e.g. quats, if necessary.ĭepending on your laboratory guidelines c leaning of the outside surface should be part of a general laboratory routine (SOP). If a flask has broken or culture medium has escaped, clean the chamber immediately with a neutral household cleaner as a first step. Ĭ leaning of hard surfaces inside and outside the shaker If possible, the humidification sensor should be removed or covered. As this can be used to decontaminate an entire laboratory or cleanroom areas, care should be taken to prevent access to the incubator chamber if a humidification option has been fitte d.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |